home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000 #2
/
Ham Radio 2000 - Volume 2.iso
/
README.TXT
< prev
next >
Wrap
Text File
|
1998-01-13
|
2KB
|
54 lines
INSTALLATION:
To install the Ham Radio 2000 V2 CD-ROM, log onto your CD-ROM
drive and type "SETUP." You will be prompted for the destination
for the Ham Radio 2000 V2 program. The setup routine will copy some
necessary DLLs into the Windows directory and the program files
into the directory you specify.
To view the documentation, consult the Ham Radio 2000 V2 help file or
HAMV2.WRI.
SHARE
IF YOU ARE PROMPTED TO ADD "SHARE.EXE" TO YOUR AUTOEXEC.BAT
First, try to run the HAM RADIO 2000 VOL. 2 program. If the program runs
normally, share is not required. If you do not see any files listed, then
you will need to add the share.exe command. SHARE.EXE should be located
in your DOS directory. To add it to your autoexec.bat file, type the
following at a DOS prompt:
EDIT c:\autoexec.bat
[ENTER]
Then add the following line to your autoexec.bat file:
C:\DOS\share.exe /l:500
C:\DOS\ is the path where share.exe is located. If share.exe is in
a different path then you must substitute the correct path.
Then save the file and reboot.
License Agreement:
The author disclaims all warranties, expressed or implied,
including, without limitation, the warranties of merchantability
and of fitness for any purpose. ByteSize CD-ROM, Inc. assumes no
liability for damages, direct or consequential, which may result
from the use of this CD-ROM. You also agree to not hold ByteSize
CD-ROM, Inc. liable for any damages, direct or consequential which may
result from the use of this CD-ROM. By purchasing and using this
CD-ROM, you are agreeing to all of these conditions.
Copyright Notice:
Copyright 1998, ByteSize CD-ROM,Inc. All rights reserved.
Windows is a trademark of Microsoft Corporation.
All other product names mentioned are trademarks or service marks
of their respective owners.